LED universal dimming actuator, 4-gang

KNX LED universal dimming actuator, 4-gang 4 x 225 W, HV LED lamps typ. 4 x 1 ... 35 W (leading edge phase control), 4 x 1 ... 200 W (trailing edge phase control) rail mounting device, 4 rail units with manual electronic operation and LED status indication project design and commissioning with ETS5 or a more recent version

Intended use

HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive

Product characteristics

Dimming operation characteristic

Logic function characteristics

• Switching and dimming of incandescent lamps, HV halogen lamps, dimmable transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps
• Mounting on DIN rail according to EN 60715 in distribution box
• Outputs can be operated manually, construction site mode
• Feedback in manual operation and in bus operation
• Disabling of individual outputs manually or via bus
• Status feedback
• KNX Data Secure compatible with ETS 5.7.3 or higher
• Can be updated with the ETS Service App
• Automatic or manual setting of the dimming principle suitable for the load
• Protected against no-load, short-circuit and overheating
• Signal in the event of a short-circuit, power failure and overload
• Feedback of the switching position and the dimming value
• Parameterisable switch-on and dimming behaviour
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with switch- off warning
• Light scene operation
• Status indication of the outputs via LED
• Operating hours counter
• Power failure longer than approx. 5 seconds causes the dimming outputs to switch off. Depending on the parameter setting, the connected load is calibrated after voltage return.
• Increase in output power possible through parallel switching of multiple outputs
• Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)
• Logic gates
• Transformer (conversion)
• Disabling element
• Comparator
• Limit value switch