LED universal dimming actuator / speed regulator, 1-gang

KNX LED universal dimming actuator / speed regulator, 1-gang 1 x 500 W, HV LED lamps typ. 3 ... 100 W rail mounting device, 4 rail units

Intended use

HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive

Product characteristics

• Switching and dimming of incandescent lamps, HV halogen lamps, dimmable transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps
• Speed controller for regulating the speed of single-phase motors e.g. induction motors or shaded pole motors
• Mounting on DIN rail according to EN 60715 in distribution box
• Automatic or manual setting of the dimming principle suitable for the load
• Protected against no-load, short-circuit and overheating
• Signal in the event of a short-circuit
• Outputs can be operated manually
• Feedback of the switching position and the dimming value
• Parameterisable switch-on and dimming behaviour
• Time functions: switch-on delay, switch-off delay, staircase lighting timer with switch- off warning
• Light scene operation
• Disabling of individual outputs manually or via bus
• Status indication of the outputs via LED
• Operating hours counter
• Power failure longer than approx. 5 seconds causes the dimming outputs to switch off. Depending on the parameter setting, the connected load is calibrated after voltage return.
• Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)