KNX RF radio converter

KNX RF radio converter project design and commissioning with ETS5 or a more recent version

Intended use

Product characteristics

• Connection of KNX radio networks with cabled KNX lines
• Extension of the radio range in KNX radio networks (repeater operation, external power supply with 24 V DC, e.g. ref.-no. NT 2415 REG VDC) a suitable cover
• Use as media coupler in the function of area or line coupler (depending on the physical address)
• Use as KNX RF repeater possible
• Filter settings and filter tables
• As of V01: KNX Data Secure compatible with ETS 5.7.3 or higher
• As of V02: use as segment coupler possible with ETS 6.0.5 or higher
• Influence on forwarding of group telegrams (routing) by filter function in coupler operation
• Support of the full address range (groups 0-31) for filter function
• Forwarding of group telegrams (TP > RF, RF > TP) parameterizable
• Forwarding of physically addressed telegrams (TP > RF, RF > TP) parameterizable
• Forwarding of broadcast telegrams (TP > RF, RF > TP) parameterizable
• Telegram repetitions in case of transmission errors for group, broadcast and physically addressed telegrams can be set on the TP side
• Telegram confirmation for group and physically addressed telegrams can be separately configured on the TP sid
• Configuration lock can be set (programming only via TP or RF)
• Status LED
• Conversion and generation of RF system broadcast telegrams
• Support of long frames
• Safe-state mode to stop the application program (e.g. if the device does not function properly due to errors in the project design or during commissioning)
• Function for reset to delivery state