Name: Universal 2-gang touch dimmer insert LED
Brand: JUNG
SKU: 1712DE
Price: 224980 KZT
Availability: InStock

Description & specifications

Universal 2-gang touch dimmer insert LED with satellite input

Intended use

Product characteristics

Switching and dimming of lighting
Operation with suitable cover
Installation in flush box with dimensions according to DIN 49073
Two independent outputs for two light groups
Asymmetric load distribution possible
Device works according to the leading edge phase control or trailing edge phase control principle
Automatic or manual setting of the dimming principle suitable for the load
Display of the set operating mode by means of LED
Device can be operated without neutral conductor
Switch-on via bulb-preserving soft start
Switch-on with last brightness or saved switch-on brightness
Switch-on brightness can be saved permanently
Minimum brightness can be saved permanently
Maximum brightness can be saved permanently
Connection of satellite units possible
Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
Electronic over-temperature protection
Test operation for functional test
Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)

Tutorial operating instructions

Rated voltage: AC 230 V ~
Mains frequency: 50/60 Hz
Stand-by power depending on the cover: approx. 0.1 ... 0.5 W
Power loss: approx. 4 W
Ambient temperature: −5 ... +45 °C Connected load per output at 25 °C
Incandescent lamps: 20 ... 210 W
HV halogen lamps: 20 ... 210 W
Electronic transformers: 20 ... 210 W
Electronic transformers with LV LED: typical 20 ... 50 W
Inductive transformers: 20 ... 210 VA
Inductive transformers with LV LED: typical 20 ... 50 VA
Dimmable HV LED lamps: typical 3 ... 50 W
Dimmable compact fluorescent lamps: typical 3 ... 50 W With setting "LED trailing edge phase control" the max. connection power for HV LED lamps and electronic transformers with LV LED doubles.
Ohmic-capacitive: 20 ... 210 W
Capacitive-inductive: not permitted
Ohmic-inductive: 20 ... 210 VA
Ohmic and HV LED: typical 3 ... 50 W
Ohmic and CFL: typical 3 ... 50 W
Amplifiers: see instructions for amplifier Connection screw terminals
single wire: 1 x 0.5 ... 4.0 mm² 2 x 0.5 ... 2.5 mm²
stranded without ferrule: 1 x 0.5 ... 4.0 mm²2 x 0.5 ... 2.5 mm²
stranded with ferrule: 1 x 0.5 ... 4.0 mm²2 x 0.5 ... 1.5 mm² Number of satellite units
Satellite insert 2-wire 1720 NE: unlimited
Satellite insert 3-wire 1723 NE: 10
Rotary satellite insert 3-wire 1733 DNE: 10
Push-buttons: unlimited
Total length of satellite cable: max. 100 m
Total length power cable: max. 100 m