Other·UDS4REGHE

LED universal dimming station 4-gang

Name: LED universal dimming station 4-gang
Brand: JUNG
SKU: UDS4REGHE
Price: 806675 KZT
Availability: BackOrder

Retail Price

806,675 ₸

Made to order from Germany

Characteristics

Article number: UDS 4 REGHE
EAN/GTIN: 4011377055162

Description & specifications

LED universal dimming station 4-gang rail mounting device, 8 rail units

Intended use

HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive

Product characteristics

Switching and dimming of incandescent lamps, HV halogen lamps, dimmable transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps
Suitable for mixed load up to the specified output
Operation by means of push-button sensors, sensor modules, push-button modules or unlit installation buttons
Operation by means of push-button sensors, sensor modules, push-button modules or unlit installation buttons
Mounting on DIN rail according to EN 60715 in distribution box
It is not possible to operate the device with universal amplifiers in conjunction with electronic transformers! Please use TRONIC amplifiers for power extension when operating electronic transformers.
The dimming station can be controlled using the button panel
Activation of status LEDs on the control units. The dimming station has the activation outputs A1’...A4’ for this purpose.
Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest
Electronic over-temperature protection
Integrated memory function for each channel (storing of switch-on brightness value)
Switch-on brightness can be saved permanently
Switch-on via bulb-preserving soft start
Switching off by dim-down function
Increase in output power possible through parallel switching of multiple outputs
Power extension possible by means of amplifiers (ref.-no. ULZ 1755 REG)
Special connection for hotel card switch
Central switching function All On, All Off
Parallel connection of two dimming stations or one dimming and one relay station
Automatic setting of the dimming principle suitable for the load card the light will be switched on with the stored brightness level. After removing the hotel card the light remains on and can be controlled for 1 more minute. After the elapsed time the light dims down (within an adjustable time of 30 seconds to 3 minutes) to minimum brightness and then switches off. The dimming station can be controlled again after plugging in the hotel card.

Function hotel card switch

Technical data

Rated voltage: AC 230 ... 240 V ~
Power loss: max. 20 W
Mains frequency: 50/60 Hz
Stand-by power: max. 2 W Terminals -, +
Control voltage: DC 24 V SELV
Current carrying capacity: 10 mA
Length of control cable: max. 100 m Number of control units
NO contact): depending on push-button module, consider current consumption Switching inputs E1ON/OFF ... E4ON/OFF
Resistance Ri: 200 kΩ Activation outputs A1' ... A4'
Resistance Ra: 330 Ω Mains / load outputs / key card switch
Connection mode: screw terminals
single wire: 1.5 mm²
stranded without ferrule: 1 mm²
stranded with ferrule: 0.75 mm² Load outputs A1 ... A4
Length of output cable per channel: max. 100 m Connected load per channel
Incandescent lamps: 20 ... 150 W
HV halogen lamps: 20 ... 150 W
Electronic transformers: 20 ... 150 W
Inductive transformers: 20 ... 150 VA
Dimmable HV LED lamps: typical 3 ... 30 W
Dimmable compact fluorescent lamps: typical 3 ... 30 W
Ohmic-capacitive: 20 ... 150 W
Ohmic-inductive: 20 ... 150 VA
Capacitive-inductive: not permitted Reduction of load for every 5 °C
exceededing 45 °C: -15 % Max. load for outputs connected in parallel is limited to 80 %.
Mounting width: 144 mm (8 rail units)